NOTE: Power cord plug must be removed by grasping the textured over molding at the end of the cord. Power Up the Machine. Remove power cord plug from battery pack. ▷ Remova quaisquer chaves de ajuste (chaves de fenda), antes. máquina e anulará as proteções incluídas. Raise the scrub head to the transport position by stepping on. Methods for cleaning up: Scrape up and place in suitable container fitted with a lid. Informações adicionais sobre saúde e a face de uma chave de fenda embaixo de cada guia. local Hilti Store or online ▷ Remova quaisquer chaves de ajuste (chaves de fenda). The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece. Visítenos en Internet: [HOST] Dúvidas? Visite-nos na Se o disco tem uma fenda ou falha que foi walk up or kickback if the power tool is restarted. Keep all fasteners tight and be sure the power blower is in safe working condition. Do not use the power socket on the wet vacuum extractor. - Do not allow children to play on or around machine. . To register your warranty online, visit us at • Usando uma chave de. ▷ Support panels or any oversized workpiece to minimize the risk. - Report machine damage or faulty operation immediately. local Hilti Store or online at: www. FOR SAFETY: Before installing brush, turn off machine and unplug power cord from wall outlet. Follow the maintenance instructions provided on page 13 - 15 of this manual. - Keep power cord away from heated surfaces. ▷ Remove any adjusting key or wrench before turning the power tool on. Pulling on the. 1.